LEGO® Jurassic World™ - manual

LEGO Jurassic WorldManual

Enter
x

Navigating this manual

Welcome to the LEGO® Jurassic World™ web manual.

You can use the Contents menu on the left to skip directly to the section you're looking for. Alternatively, click the Enter button to access the manual, and use the Next and Previous buttons to navigate page by page.

Can't find what you're looking for? There's even more information in the FAQs and ReadMe: you can view them using the buttons at the top of the screen.

Warnings & Ratings

Important Health Warning About Playing Video Games

Photosensitive Seizures

A very small percentage of people may experience a seizure when exposed to certain visual images, including flashing lights or patterns that may appear in video games. Even people who have no history of seizures or epilepsy may have an undiagnosed condition that can cause these “photosensitive epileptic seizures” while watching video games.

These seizures may have a variety of symptoms, including lightheadedness, altered vision, eye or face twitching, jerking or shaking of arms or legs, disorientation, confusion, or momentary loss of awareness. Seizures may also cause loss of consciousness or convulsions that can lead to injury from falling down or striking nearby objects.

Immediately stop playing and consult a doctor if you experience any of these symptoms. Parents should watch for or ask their children about the above symptoms—children and teenagers are more likely than adults to experience these seizures. The risk of photosensitive epileptic seizures may be reduced by taking the following precautions: Sit farther from the screen; use a smaller screen; play in a well-lit room; and do not play when you are drowsy or fatigued. If you or any of your relatives have a history of seizures or epilepsy, consult a doctor before playing.

Precautions to take during use

  • Sit a good distance away from the monitor.
  • Avoid playing if you are tired or have not had much sleep.
  • Make sure that the room in which you are playing is well lit.
  • Rest for at least 10 to 15 minutes per hour while playing a video game.
ESRB: E 10+ PEGI: 7

LEGO JURASSIC WORLD software © 2015 TT Games Ltd. Produced by TT Games under license from the LEGO Group. LEGO, the LEGO logo, the Brick and the Knob configurations and the Minifigure are trademarks of the LEGO Group. © 2015 The LEGO Group. Jurassic World is a trademark and copyright of Universal Studios and Amblin Entertainment, Inc. Licensed by Universal Studios Licensing LLC. All Rights Reserved. Published on the Mac by Feral Interactive Ltd. Mac and the Mac logo are trademarks of Apple Inc., registered in the U.S. and other countries. Feral and the Feral logo are trademarks of Feral Interactive Ltd. All other trademarks and copyrights are the property of their respective owners. All rights reserved.
WBSHIELD
WB GAMES LOGO, WBIE LOGO, WB SHIELD: ™ & © Warner Bros. Entertainment Inc.
(s15)

1

Introduction

Get ready for an adventure 65 million bricks in the making!

The gates of LEGO Jurassic World are now open. Relive the heart-pounding action from all four Jurassic movies in this colossal LEGO adventure! Explore the hidden wonders of Isla Nublar and Isla Sorna, where you can create and control your own collection of unique, customizable LEGO dinosaurs!

2

Installation

As part of the Steam download process, the game has already been installed on your computer. To start playing the game, read the Getting Started section.

Getting Started

  1. Double-click on the Steam application icon. By default this is located in the Applications folder on your computer’s hard drive.

  2. If you are not already signed in, the Steam Login dialog will appear. Enter your account name and password, then select Login.

  3. The Steam application will launch. Select the Library tab.

  4. In the library, highlight LEGO Jurassic World in the list of games on the left-hand side of the window, then select Play.

  5. The LEGO Jurassic World pre-game Options window will appear. Click on the Play button. The game will launch.

  6. After the splash screens and videos, the Start screen will appear. Press the Return (↩) key.

  7. The Main Menu will appear. Select New Game.

  8. The Save Game screen will appear. Select an empty slot, then select Yes to confirm.

  9. A message will appear confirming that the game will be saved automatically to this slot. Press the Return (↩) key.

  10. After the opening video, you'll find Robert Muldoon and Jophery Brown transferring a raptor to a new enclosure, but they may have bitten off more than they can chew…

3

Controls

You can play LEGO Jurassic World using either a keyboard and mouse or a gamepad. You can customize your keyboard or gamepad controls in the Control Setup menu. You can access this either from the Main Menu via Options → Control Configuration, or from the in-game Pause menu via Options → Control Setup.

Keyboard

The default keyboard controls are detailed below.

The instructions in this manual refer to the default keyboard controls for player 1; if you have customized your controls or are using a gamepad, the controls listed here will not apply.


Action Player 1 Player 2
Move W / A / S / D ◀ / ▲ / ▼ / ▶
Tag U P
Special K '
Jump J ;
Action H L
Character toggle up / down Space and Left Control (ctrl) = and -
Look around 4 / E / R / T G / V / B / N
Show map M /
Start / pause Return (↩) Right Alt (⌥)
4

Gamepad

You can play LEGO Jurassic World using a gamepad. In fact, we recommend you do!

The diagram on this page is based on a standard controller layout; all gamepads have similar buttons but some may differ in layout from the gamepad shown here. For more information, see Can I play LEGO Jurassic World with a gamepad? in the FAQs.

Gamepad control diagram

Move
Tag
Special
Jump
Action
Character toggle up / down
Look around
Show map
Start / pause
5

Hubs

There are four hub areas in LEGO Jurassic World, which you can explore between levels.

To find the start of the next level and continue the story while in a hub, follow the blue stud trail.

You'll return to a hub after completing each level. To return to a hub during a level, select Return to the Island from the in-game Pause menu.

Levels

LEGO Jurassic World is split into levels, accessible from the different hub areas.

The first time you play a level, you do so in story mode, and will only have access to a limited cast of characters. Some areas will be out of reach in story mode: return to the level in free play mode and use different characters to explore new areas.

Free Play

Once you have completed a level in story mode, you can replay it in free play mode using any of the characters you have unlocked so far.

You can use different characters to access areas that were previously inaccessible and find collectibles you missed the first time round.

6

Characters

You'll unlock new characters as you play through the game.

Different characters have different abilities. If you find that you can't perform an action or access an area with one character, try switching to another.

Changing Characters

To change characters, hold the U key to bring up the character wheel. Highlight the character you want to use, then release the U key to switch to that character.

In free play mode, select the Add Character icon (“+” sign) from the character wheel to bring up the character grid, which lets you switch to any of your unlocked characters.

You can also change between active characters quickly by “tagging” them. To do so, tap the U key to change to the nearest playable character.

Aiming and Firing

Some characters have weapons that you need to aim before firing, such as tranquilizer guns.

To aim and fire, hold down the H key to bring up the target reticle. When the reticle appears, use the W/A/S/D keys to position it over your target, then release the H key to throw or fire your weapon.

7

Vehicles

Scattered throughout the game, you'll find plenty of vehicles that you can drive.

To get into a vehicle, stand next to it and press the U key. To get out, press the U key again.

To accelerate, press the J key, and to brake or reverse, press the K key. To steer, use the A and D keys.

Multiplayer

You can team up with a friend to play LEGO Jurassic World in two-player splitscreen mode. How a second player joins the game depends on whether they're using a gamepad or a keyboard.

Joining using a gamepad

Before starting the game, make sure the gamepad is connected to your computer. Press any button on the gamepad during play to activate Player 2.

Joining using a keyboard

Press the F2 key during play to activate Player 2.

NOTE: If pressing the F2 key has no effect, you may need to change your keyboard's default settings. For instructions on how to do this, please see When I press the Function keys (F1-F19) nothing happens. How do I use the Function keys? in the FAQs.

8

Technical Support

Every effort has been made to make LEGO Jurassic World as compatible with current hardware as possible. However, if you are experiencing problems when running LEGO Jurassic World, please read on.

The latest version of the FAQs can be found by selecting the FAQs button in the Support tab of the LEGO Jurassic World pre-game Options window (this is the window that opens when you launch the game), or by going straight to the Feral website: http://support.feralinteractive.com

Contacting Feral

If the FAQs and/or updates do not solve your problem, then please feel free to contact us. The following information must be obtained before contacting Feral Technical Support:

  • The error message displayed when the problem occurred (if any).
  • A LEGO Jurassic World Report.txt file. This contains:
    • An Apple System Report of your Mac
    • Any crash logs that exist for LEGO Jurassic World
    • A list of the game's contents


All the information required can be obtained by opening LEGO Jurassic World and clicking on the Support tab in the LEGO Jurassic World pre-game Options window. In the Support tab, click on the Generate Report button. Once the report is generated it will appear as a file in your ~/Downloads folder (the “~” symbol refers to your home directory). Now click on the Create Email button. Remember to attach the LEGO Jurassic World Report.txt file to your email.

In your email, please include a brief description of the problem you have experienced with LEGO Jurassic World.

email: support@feralinteractive.com

9

Warranty

Please check the warranty information provided by Steam.

Credits

Originally developed by:
TT Games
Originally published by:
Warner Bros. Interactive Entertainment
Macintosh development by:
TT Games
Macintosh publishing by:
Feral Interactive